Initial Preparations; Attaching The Strap; Attach The Strap; Holding The Camera - Canon PowerShot D20 Getting Started

Initial Preparations

Prepare for shooting as follows.

Attaching the Strap

Release Button

Holding the Camera

Charging the Battery

Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.

Attach the strap.

After attaching the strap to the strap mount,
insert the strap mount into the socket on the
camera and turn until it clicks.
To remove the strap mount, hold the release
button while turning the strap mount
counterclockwise.
To avoid dropping the camera, be sure to
place the strap around your wrist when
shooting. This camera will sink in water.
When shooting, keep your arms close to your
body and hold the camera securely to
prevent it from moving. Do not rest your
fingers on the flash.
Remove the cover.
Insert the battery.
After aligning the
charger, insert the battery by pushing it in
( ) and down (
marks on the battery and
).
11