Load Paper - Canon FAXPHONE L170 Set-up Basic Manual

Load paper.

1 Pull out the paper cassette.
2 Adjust the rear paper end guide to match the paper size.
3 Load the paper into the cassette. Make sure the paper stack sits below the hooks.
4 Adjust the blue side paper end guides to match the paper size.
Make sure the height of the paper stack does not exceed the limit marks
5 Insert the cassette into the machine as far as it will go.
HOOK
NOTE
• If you do not completely insert the cassette into the machine, paper jams may occur.
• For details, see p.4-3 of the Basic Guide.
• After you have loaded plain paper in the cassette, you can make sure the machine is printing properly
by making several copies of a document. For instructions, see Chapter 10, "Making Copies."
• Do not load paper from the rear of the cassette.
Attach the handset cradle to the machine.
1 Insert the plugs with pins into the holes on the handset cradle.
2 Insert the plugs with the handset cradle in the holes on the machine.
3 Carefully push the pins into the plugs as far as they will go.
NOTE
• If you have difficulty inserting the plugs, turn the machine so that the left side is facing you and the
right side is placed against a wall. This will allow you to insert the plugs without the machine moving.
• If the pins are not pushed fully into the plugs, the handset cradle will not be securely attached to the
machine.
HOOK
.