Canon Color imageCLASS MF8380Cdw Starter Manual page 17

1 2
Preface Installing the Machine
2.
Select the fax receive mode.
You can specify how the machine should operate for a fax call or telephone call.
By answering the prompts that appear on the display, the machine will be set to one of the following four operation modes.
<Auto><Fax/Tel Auto Switch><Answering Machine><Manual>
Do you want to use
this machine for fax
only (no telephone)?
Yes
No
No
Do you want to auto-
receive faxes and
answer phone manually?
Yes
No
No
Do you want to use
an answering machine
to answer the phone?
Yes
No
No
The receive mode is set to <Manual>.
→ Proceed to Step 3.
•
Respond to incoming calls or faxes
by picking up the handset.
•
Ring on incoming calls or faxes.
3
Configuring and Connecting the Fax
•
•
Yes
* When the telephone is connected in the auto receive mode, the
telephone rings when receiving a fax or telephone call. You can
answer the telephone while it is ringing. To turn off the telephone
ringer, see "Incoming Ring" in the
Yes
•
•
* The telephone rings on incoming calls. To turn off the telephone
ringer, see "Incoming Ring" in the
Yes
•
•
•
4
Connecting to a Computer and
Installing the Drivers
The receive mode is set to <Auto>.
→ Proceed to Step 3.
Receive faxes automatically.
Does not use the telephone.*
The receive mode is set to <Fax/Tel Auto Switch>.
→ Proceed to Step 3.
Receive faxes automatically.*
Responds to a telephone call by picking up
the handset.
The receive mode is set to <Answering Machine>.
→ Proceed to Step 3.
Receive faxes automatically.
Respond to telephone calls using the
built-in answer function.
Ring on incoming calls or faxes.
Appendix
e-Manual.
e-Manual.
17