Table of Contents
Advertisement
"REC" mode (use "
3. Measure and make sure that the output is within the standard
value.
Bias voltage for Deck 2
Erase voltage for Deck 2
15.1.3. Bias Frequency Adjustment (Deck 1/2)
1. Set the unit to "AUX" position.
2. Insert the Normal blank tape (QZZCRA) into DECK 2 and set the
unit to "REC" mode (
3. Adjust L1002 so that the output frequency is within the standard
value.
Standard Value: 97
±8 kHz
15.2. Tuner Section
15.2.1. AM-IF Alignment
1. Connect the instrument as shown in Fig.5.
REC/STOP" key).
14±4mV (Normal)
80mV (Normal)
Fig.2
Fig.3
use "REC/STOP" key).
Fig.4
66
Advertisement
Table of Contents
