Panasonic SA-AK520E Service Manual page 28

Step 11 Remove the pin.
Step 12 Release the claw, and then remove the traverse deck ass'y.
Note:
Be careful not to lose the 3 floating spring because those will also be removed on removal of the
traverse deck ass'y.
- Installation of the CD Servo P.C.B. after replacement
Step 1 Connect the FFC board.
Step 2 Install the CD servo P.C.B. in the traverse deck ass'y.
Step 3 Remove 3 screws.
Step 4 Solder.
28