Panasonic SA-AK520E Service Manual page 62

4. Load a cassette tape with the erasure prevention tab, remove from
right side only and close the cassette holder.
5. Press "REVERSE FM MODE/BP" (Tape will be stop after 2
seconds)
6. Load a pre-recorded tape with both side record tabs intact and
close the cassette holder.
7. Press "PLAY/TUNE/TIME ADJ UP" (After TPS function, tape will
stop automatically)
8. Press "REC/STOP" (Tape will not move)
9. Press "STOP/TUNE MODE" to indicate Error code.
- If several problem exist, error code will change each time
when "
(e.g. H01
10. Press "TAPE, DECK 1/2" to select Deck 1.
11. Repeat step 2 to 9 to test Deck 1. (Tape Deck 1 will not check H02
because of no recording function)
13.4. CD Mechanism Test (F15, F26, F16, F17, F27, F28, F29, H15)
1. Press "CD".
2. Press "OPEN/CLOSE (1)" and place a CD.
3. Press "OPEN/CLOSE (1)" to close the tray.
4. Press "OPEN/CLOSE (5)" and wait until the tray is open.
5. Press "OPEN/CLOSE (1)" and remove the CD.
6. Press "OPEN/CLOSE (1)" to close the tray.
7. Press " /STOP" to indicate Error Code.
- If several problem exist, error code will change each time
when "
13.5. To clear all Error code
1. Press "STOP/TUNE MODE" button for 5 seconds.
2. FL indicator shows "CLEAR" for 1 second and change to "T".
/STOP" is pressed.
H03 F01 .....etc.)
/STOP" is pressed. (e.g. F15 F26
62
F16 ....etc).