Exterior Lamps Off; Reminder; Headlamp High/Low-Beam Changer; Flash-To-Pass - Cadillac CT4 2023 Owner's Manual

the AUTO or position to
reactivate the IntelliBeam
system. The instrument
cluster light will come on to
indicate the IntelliBeam
system is reactivated.
The high beams may not turn
off automatically if the system
cannot detect another
vehicle's lamps because of any
of the following:
The other vehicle's lamps
are missing, damaged,
obstructed from view,
or otherwise undetected.
The other vehicle's lamps
are covered with dirt, snow,
and/or road spray.
The other vehicle's lamps
cannot be detected due to
dense exhaust, smoke, fog,
snow, road spray, mist,
or other airborne
obstructions.
The vehicle's windshield is
dirty, cracked, or obstructed
by something that blocks the
view of the light sensor.
The vehicle is loaded such
that the front end points
upward, causing the light
sensor to aim high and not
detect headlamps and
taillamps.
The vehicle is being driven
on winding or hilly roads.
The automatic high-beam
headlamps may need to be
disabled if any of the above
conditions exist.

Exterior Lamps Off

Reminder

A warning chime sounds if the
driver door is opened while
the ignition is off and the
exterior lamps are on.
Headlamp High/
Low-Beam Changer
: Push the turn signal lever
away from you and release, to
turn the high beams on. To
return to low beams, push the
lever again or pull it toward
you and release.
Lighting
This indicator light turns on in
the instrument cluster when
the high-beam headlamps
are on.

Flash-to-Pass

To flash the high beams, pull
the turn signal lever toward
you, and release.

Daytime Running

Lamps (DRL)

DRL can make it easier for
others to see the front of your
vehicle during the day. Fully
functional DRL are required on
all vehicles first sold in
Canada.
147