Table of Contents
Advertisement
Warning (Continued)
will begin to slow in the
same lane and eventually
come to a complete stop on
the road.
Any time the steering wheel
light bar flashes red, resume
manual steering immediately.
To begin steering manually,
hold the steering wheel firmly
(with both hands) using the
highlighted regions as shown
in the picture below.
The instrument cluster light
, will also turn red and a
message will display in the
Driver Information Center
(DIC). In addition, beeps will
sound, or the Safety Alert
Seat will vibrate. To view
Collision and Detection
options, touch the Settings
icon on the infotainment home
page. Select Vehicle to
display the list of available
options and select Collision/
Detection Systems . After you
begin steering manually, then
Super Cruise will disengage.
The red flashing steering
wheel light bar could occur
under any of the following
conditions:
Lane markings are poor,
or visibility is limited.
The Driver Attention System
(DAS) does not detect that
the driver's head and eyes
are directed toward
the road.
ACC is canceled.
Driving and Operating
The vehicle is on a tight
curve, or the lanes are too
wide, or the vehicle goes into
a curve too fast.
The compatible road ends.
The vehicle is approaching
an intersection controlled by
a traffic light, stop sign,
or other traffic control
device.
A Super Cruise system fault
occurs.
Super Cruise is unable to
complete the lane change
maneuver.
Attention to the Road
Warning
Super Cruise is a driver
assistance system and
cannot accurately detect or
predict all situations. Super
Cruise is not a crash
avoidance system. To
prevent serious injury or
death, you must supervise
the driving task and monitor
323
(Continued)
Advertisement
Chapters
Table of Contents
