Exterior Lamps Off Reminder; Headlamp High/Low-Beam; Changer; Flash-To-Pass - Cadillac CT5 2020 Owner's Manual

Cadillac CT5 Owner Manual (GMNA-Localizing-MidEast-13060107) - 2020 -
CRC - 8/29/19
132 LIGHTING
The other vehicle's lamps cannot
be detected due to dense exhaust,
smoke, fog, snow, road spray, mist,
or other airborne obstructions.
The vehicle's windshield is dirty,
cracked, or obstructed by
something that blocks the view of
the light sensor.
The vehicle is loaded such that the
front end points upward, causing
the light sensor to aim high and
not detect headlamps and
taillamps.
Driving on winding or hilly roads.
The automatic high-beam headlamps
may need to be disabled if any of the
above conditions exist.
Exterior Lamps Off
Reminder
A warning chime sounds if the driver
door is opened while the ignition is off
and the exterior lamps are on.

Headlamp High/Low-Beam

Changer

: Push the turn signal lever away
from you and release, to turn the high
beams on. To return to low beams,
push the lever again or pull it toward
you and release.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.

Flash-to-Pass

To flash the high beams, pull the turn
signal lever toward you, and release.

Daytime Running

Lamps (DRL)

DRL can make it easier for others to
see the front of your vehicle during
the day.
If equipped, the DRL will come on
when all of the following conditions
are met:
The ignition is on.
The exterior lamp control is
in AUTO.
The light sensor determines it is
daytime.
When the DRL are on, the taillamps
and other lamps will not be on.
The DRL turn off when the headlamps
are turned to or the ignition is off.
Automatic Headlamp
System
When the exterior lamp control is set
to AUTO and it is dark enough
outside, the headlamps come on
automatically.