Table of Contents
Advertisement
IS THERE A PROBLEM WITH YOUR IRON?
PROBLEMS
Your iron
produces little to
no steam.
The soleplate
is scratched or
damaged.
The iron steams
once the water
tank has been
filled.
The spray does
not spray water.
If you have any problems or queries please call our Customer
Relations team first for expert help and advice.
See Helpline number in the separate guarantee
POSSIBLE CAUSES
The water tank is empty.
The anti-calc valve is dirty.
Your iron is clogged up with
limescale.
Your iron has been used for
too long in the dry ironing
function.
You have placed your iron on
a metallic iron rest or ironed
over metal zips or fastners.
The steam control dial is
not set to
.
The water tank is too full.
The water tank is not full
enough.
and country list leaflet.
SOLUTIONS
Fill it up.
Clean the anti-calc valve.
Refer to "Cleaning the anti-calc
valve" section.
Clean the anti-calc valve and steam
chamber. Refer to "Cleaning the
anti-calc valve" and "Descaling the
steam chamber" sections.
Clean the steam chamber. Refer
to "Descaling the steam chamber"
section.
Always place your iron on its heel rest
when not in use.
Do not iron over metal zips or fastners.
Ensure that the steam control dial is
set to
.
Do not exceed the max level for filling.
Add water to the water tank until
max level.
19
Advertisement
Table of Contents
