SUMMARY IMPORTANT SAFETY RECOMMENDATIONS Important safety recommendations ............p. 2 Before first use ....................p. 5 PREPARATION Which water should I use? ................p. 6 Filling the water tank ..................p. 6 Adjusting the temperature and steam ............ p. 7 Dry ironing ......................
IMPORTANT SAFETY RECOMMENDATIONS • Please read these instructions carefully before first use. This product has been designed for domestic and indoor use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
Page 6
appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down. • The surfaces of your appliance can reach very high temperatures when functioning, which may cause burns.
Page 7
• Completely unwind the power cord before plugging into an earthed socket. • The soleplate of your iron can reach extremely high temperatures, and can cause burns: do not touch them. Never touch the electrical power cords with the soleplate of the iron. •...
BEFORE FIRST USE Remove any labels from the soleplate before heating the iron. Before using the steam function in your iron for the first time, we recommend that you allow the iron to operate a few moments in a horizontal position without coming into contact with your laundry.
PREPARATION Which water should I use? • Your appliance was designed to operate using untreated tap water. However, it is necessary to periodically clean the steam chamber to remove any mineral deposits. • Do not use pure demineralised or pure distilled water, water from clothes dryers, scented or softened water, rain water, filtered, bottled or boiled water, water from refrigerators, batteries or air conditioners, as these may damage the iron.
• Plug in the appliance. Adjusting the temperature and steam • Adjust the temperature and steam control, referring to the table below. • Select eco setting and set the thermostat on “••” to save energy compared with the maximum position (According to model). TEMPERATURE STEAM CONTROL FABRIC...
• Your iron heats up quickly: start with fabrics that are ironed at a low temperature and finish with those that require a higher temperature. • If you lower the thermostat temperature, wait (around 10 minutes) until the temperature drops to avoid burning the fabric.
Vertical steam ironing • Hang the item on a hanger. The steam is very hot; never steam iron clothing while it is being worn - always use a hanger. max. • Set the thermostat control to “MAX”. sec. • Press the turbo steam button (turbo steam) in pulses, moving the iron from top to bottom.
Dampening clothing (Spray) • Press repeatedly on the spray button to moisten clothing and remove stubborn creases. • Ensure that there is water in the tank before using the spray button. While ironing • Do not lay the iron down on the soleplate; use the heel rest for this purpose.
IRON STORAGE AND MAINTANANCE Storing your iron • Unplug the iron and wait for the soleplate to cool. (1 hour) • Empty the water tank. • Set the steam control to Click • Wrap the cord around the iron’s heel rest. Store the iron on its heel rest.
Page 15
• To remove the anti-limescale collector, open the water tank cover Click • Pull on the collector near the steam control. • Soak the collector for 4 hours in a glass of water with lemon juice. • Rinse the collector under the tap. Click •...
Descaling the steam chamber (once per month) • Allow your iron to heat up with a full water tank while on its heel Max. rest and with the temperature control set to maximum. • Once the indicator light switches off, unplug the iron and place it over a sink.
• Unplug your iron and, once cooled, wipe it with a damp cloth. • Never use chemical or abrasive products. During the next use, turn on your iron in a horizontal position without putting it into contact with your laundry in order to eliminate any water containing mineral residues that remain in the soleplate.
IS THERE A PROBLEM WITH YOUR IRON? PROBLEMS POSSIBLE CAUSES SOLUTIONS You are using the steam when Wait for the indicator light to turn Water is leaking from the holes in the iron is not hot enough. off. the soleplate. You are using the turbo steam Wait a few seconds between each button (turbo steam) too often.
Page 19
If you have any problems or queries please call our Customer Relations team first for expert help and advice: consult our website for contact details www.tefal.co.uk Helpline: 0345 602 1454 - UK 01 677 4003 - ROI...