Input/Output Interfaces
5.8.4 NIC Connector
Figure 5-11 shows the RJ-45 connector used for the NIC interface. This connector includes the
two status LEDs as part of the connector assembly.
Figure 5-11. RJ-45 Ethernet TPE Connector (as viewed from rear of chassis)
5.8.5 NIC Specifications
Parameter
Modes Supported
Standards Compliance
OS Driver Support
Boot ROM Support
F12 BIOS Support
Bus Inteface
Power Management Support
5-16
Speed LED
8 7 6 5
Table 5-1 1. NIC Specifications
Compatibility standard orprotocol
10BASE-T half duplex @ 10 Mb/s
10Base-T full duplex @ 20 Mb/s
100BASE-TX half duplex @ 100 Mb/s
100Base-TX full duplex @ 200 Mb/s
1000BASE-T half duplex @ 1 Gb/s
1000BASE-TX full duplex @ 2 Gb/s
IEEE 802.1P, 802.1Q
IEEE 802.2
IEEE 802.3, 802.3ab, 802.3ad, 802.3u, 802.3x, 802.3z
MS-DOS
MS Windows XP Home/Pro, Vista Home/Pro, Windows 7
MS Windows NT 3.51 & 4.0
Novell Netware 3.x, 4.x, 5x
Novell Netware/IntraNetWare
SCO UnixWare 7
Linux 2.2, 2.4
PXE 2.0
Intel PRO/100 Boot Agent (PXE 3.0, RPL)
Yes
PCI Express x1
ACPI, PCI Power Management Spec.
www.hp.com
Activity LED
Pin
Description
1
Transmit+
2
Transmit-
3
Receive+
6
Receive-
4, 7, 8
Not used
4 3
2
1
Technical Reference Guide