HP Compaq Elite 8000 CMT Technical Reference Manual page 104

Error Messages and Codes
Message Probable Cause
1202- 1 3 Data block retry limit reached [2] 1210-01
1202-21 Time-out waiting for SYNC [3]
1202-22 Time-out waiting for response [3]
1202-23 Data block retry limit reached [3] 1210-04
1203-XX Modem external termination test
1203-01 Modem external TIP/RING
failure
1203-02 Modem external data TIP/RING
fail
1203-03 Modem line termination failure
1204-XX Modem auto originate test
1204-01 Time-out waiting for SYNC [4]
1204-02 Time-out waiting for response [4]
NOTES:
[1] Local loopback mode
[2] Analog loopback originate mode
[3] Analog loopback answer mode
A.12 System Status Error Messages (16xx-xx)
Message
1601-xx
161 1-xx
A-12
Table A-10. (Continued)
Modem Communications Error Messages
Table A-1 1
System Status Error Messages
Probable Cause
Temperature violation
Fan failure
www.hp.com
Message Probable Cause
Time-out waiting for SYNC [6]
1210-02 Time-out waiting for response [6]
1210-03 Data block retry limit reached [6]
RX exceeded carrier lost limit
1210-05 TX exceeded carrier lost limit
1210-06 Time-out waiting for dial tone
1210-07 Dial number string too long
1210-08 Modem time-out waiting for remote
response
1210-09 Modem exceeded maximum redial limit
1210- 1 0 Line quality prevented remote response
1210- 1 1 Modem time-out waiting for remote
connection
[4] Modem auto originate test
[5] Modem auto answer test
[6] Modem direct connect test
Technical Reference Guide