To Remove The Upper Ris Cover - Agilent Technologies 7200 Operation Manual

3 Operating in Electron Impact (EI) Mode

To Remove the Upper RIS Cover

To Remove the Upper RIS Cover

64

The upper RIS cover is in front of the instrument
Remove it to access the latches on the analyzer cover, attach the
RIS probe, or access the EI calibration vial. Do not remove the
upper RIS cover for any other reasons.
Procedure
1 Grasp the cover by the outside corners.
2 Pull the cover straight up, and remove it from the
instrument.
Figure 19 Upper RIS cover
(Figure 19).
Operation Manual