Restoring The Software; Turning Off The Computer - HP Compaq dc7600 USDT Getting Started Manual

Getting Started

Restoring the Software

Restore the original operating system and factory-installed
software by using the Restore Plus! CD and any other CDs that
came with the computer. Carefully read and follow the
instructions provided for the restore solution that came with the
computer.
For questions about or problems with this CD, please contact
customer support.

Turning Off the Computer

To properly turn off the computer, first shut down the operating
system software. In Microsoft Windows XP Professional, click
Start > Shut Down. In Microsoft Windows XP Home, click
Start > Turn Off Computer. The computer automatically shuts
down.
Depending on the operating system, pressing the power button
causes the computer to enter a low-power or "standby" state
instead of automatically turning the power off. This allows you to
conserve energy without closing software applications; later, you
can start using the computer immediately without having to
restart the operating system and without losing any data.
Ä
CAUTION: Manually forcing the computer off
standby state and
To force the computer off manually, press and hold the power
button for four seconds.
To reconfigure the power button to work in On/Off mode, run
Computer Setup. Refer to the Computer Setup (F10) Utility
Guide on the Documentation and Diagnostics CD for more
information about using the Computer Setup utility.
6
can cause loss of unsaved data.
www.hp.com
bypasses the
Getting Started