HP Compaq dc5700 MT Reference Manual page 152

Power Cord Set Requirements
Country-Specific Requirements
Additional requirements specific to a country are shown in parentheses and explained below.
Country
Australia (1)
Austria (1)
Belgium (1)
Canada (2)
Denmark (1)
Finland (1)
France (1)
Germany (1)
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 0.75mm
Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of
the agency responsible for evaluation in the country where it will be used.
2. The flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor. The wall plug
must be a two-pole grounding type with a NEMA 5- 1 5P (15A, 125V) or NEMA 6- 1 5P (15A,
250V) configuration.
3. Appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration
number in accordance with the Japanese Dentori Law. Flexible cord must be Type VCT or
VCTF, 3-conductor, 0.75 mm
with a Japanese Industrial Standard C8303 (7A, 125V) configuration.
B–2
Accrediting
Agency
EANSW
OVE
CEBC
CSA
DEMKO
SETI
UTE
VDE
conductor size. Wall plug must be a two-pole grounding type
2
437804-001
Country
Italy (1)
Japan (3)
Norway (1)
Sweden (1)
Switzerland (1)
United Kingdom (1)
United States (2)
2
Service Reference Guide, dc5700
Accrediting
Agency
IMQ
METI
NEMKO
SEMKO
SEV
BSI
UL
conductor size.