Access Panel - HP Compaq dc5700 MT Reference Manual

7.3

Access Panel

1. Prepare the computer for disassembly
Ä CAUTION: Before removing the access panel, ensure that the computer is turned off and that the power
cord is disconnected from the electrical outlet.
1. Push down on the button 1 to release the latch that secures the access panel to the computer
chassis.
2. Slide the access panel back 2 about 1.3-cm (1/2-inch), then lift it off the chassis.
To install the access panel, reverse the removal procedure.
Service Reference Guide, dc5700
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
(Section 7.1).
437804-001 7–3