How To Run A Wash Cycle; Daily Use - Zanussi ZWP 582 User Manual

Lights of cycle progress
3
START/PAUSE button
4
EXTRA RINSE button
5
Dispenser box

How to run a wash cycle?

Using for the first time
• Ensure the electrical and water connec-
tions comply with the installation in-
structions.

Daily use

Loading washing
• Open the lid of the
appliance.
• Open the drum by
depressing the
locking button A:
The two shutters
unlock automati-
cally.
• Load the washing,
close the drum and the lid of your washing
machine.
Warning! Before closing the lid of your
appliance, ensure that the drum is properly
closed :
• When the two shutters are closed,
• locking button A released.
Proportioning of detergents
Pour the amount of washing into the washing
and prewash
www.zanussi.com
A
compartments if you have
OPTIONS button
6
SPIN button
7
Prewash
Wash
Softener (do not fill above the MAX
M
symbol )
• Remove the polystyrene insert and all
other items inside the drum.
• Run an initial wash cycle at 90°C, with-
out any washing but with detergent to
clean the water tank.
selected the "prewash" option. Pour fabric soft-
ener into the compartment
Selection of desired programme
Turn the programme selector to the required
programme. The "Start/Pause" pushbutton
flashes green.
If you turn the programme selector to another
programme while a cycle is in progress, the ap-
pliance will ignore the new selected pro-
gramme. The "Start/Pause" pushbutton flashes
red for a few seconds.
Selecting the spin speed
Press the "Spin" button to change the spin
speed, if you want your washing to be spun at a
different speed to the one selected by the ap-
pliance. You can also select "Rinse hold"
"No Spin" .
For the maximum spin speeds see "Washing
programmes".
Rinse hold
if necessary.
or
5