HP c8000 Hardware And Software Setup Manual page 25

HP workstation c8000 — Getting Started
4. Install the new components.
The following diagram shows the location of internal
components. For detailed instructions on installing hardware
components, see the HP c8000 Technical Reference Guide.
Location of Internal Components
1 PCI and AGP slots
2 Power supply
3 Air flow guide and fan
4 Processor(s)
5. Replace the system access panels.
6. Connect all cables and power cords and turn on the system.
New Component Setup
5 Optical drive bay(s)
6 Memory slots
7 Hard drive bay(s)
3–3