LENCO 8711902066156 User Manual page 18

USB Charging (5V Out)
The USB port is designed for charging external devices, such as smart phones. Output
power is 5V 1A
AUX Input Jack
1. Press the POWER button to turn on the unit.
2. Press the MODE button repeatedly to select the Aux-In mode. 'Aux-In' will appear on the LCD display.
Connect the AUX connect wire from the line out jack of your personal player (e.g. portable MP3
3.
player/TV) to the AUX input jack.
Start playback from your personal player.
4.
Line Input Jack
1. Press the POWER button to turn on the unit.
2. Press the MODE button repeatedly to select the Line-In mode. 'Line-in' will appear on the LCD display
3. Connect the 3.5mm connect wire from the line out jack of your personal player (e.g. portable MP3 player)
to the Line input jack.
4. Start playback from your personal player.
Phones Jack
1. Rotate the Volume counter-clockwise to set a low volume, to prevent hearing damage.
2. Inset headphones to the Phone jack.
Note the following information: Only use the power supply listed below.
- EN 18 -