LENCO 8711902066156 User Manual page 12

Prune (To Remove Stations That are Listed But Unavailable)
In DAB mode, press [
Prune option "Yes" or " No".
System (DAB)
In DAB menu, press [
the system settings.
1. Language
Press [ENTER] to go to language selection; the default source language is English, the selected
language will have "*" displayed at the top right. Users may choose between English, French,
Italian. Deutsch, Polish, Nederlands, Espanol
Factory Reset
2.
Press [ENTER] to perform a factory reset. If you wish to perform the reset operation, push
until "YES" is highlighted on the display and press [ENTER]. A full reset of your radio will be
performed. All presets and station lists will be erased.
3. SW Version
Press [ENTER] to view software version. Press Menu to stop displaying the software version.
*If there are no operations after 30 seconds, the display will return to normal.
Preset
Preset Recall
1.
In DAB menu, press
(preset) you want to play by pressing <or> and when found, press [ENTER].
Note:
Note: you have not previously stored a preset station and the preset button is pressed, "Empty
preset" will be displayed.
Preset Store
2.
You may store your preferred DAB stations to the preset station memories. There are 50 memory
presets in your radio. Presets are remembered by your radio in the event of a power failure.
Select a DAB radio station and press [MENU], then select [Preset store] with
press [ENTER]. Press [
desired preset number under which you will store the station you are currently playing. Press
[ENTER] to confirm.
] or [ ] to display the "Prune" submenu, press [ENTER] button to select the
] or [ ] to show the "SYSTEM" submenu, press the [ENTER] button to go to
or to select "Preset Recall", then press [ENTER] and look for the station
or ] to select a storage space, then press [ENTER] to confirm the
- EN 12 -
or
and , then