LENCO 8711902066156 User Manual page 14

4. When the waveband end is reached, the radio will recommence tuning from the opposite waveband
end. If no stations are found, please ensure the aerial is extended and test the reception by doing
another auto scan in a different location.
Menu
1. Scan Setting
In FM mode, press MENU to enter the FM menu, then press
ENTER to select the sensitivity setting:
1.1. All stations: 15dB~
Strong stations only: 19dB~
1.2.
Audio Setting
2.
Stereo allowed:
2.1.
2.2. Forced mono
System (FM system), same as DAB system setting.
2.3.
PRESET:
3.
3.1. Preset Recall (Choose the Station):
To recall a presseted FM station, press [MENU], select [PRESET RECALL], press [ENTER], then
use the < or > button to find the station you want to recall and press [ENTER] to confirm.
3.2. Preset Store (Save a Station):
You may store your preferred FM stations to the preset station memories. There are
50 memory presets in your radio. Presets are remembered by your radio in the event of a power
failure.
The procedure for setting presets and using them to tune stations is the same for DAB modes:
In FM mode, select the desired Frequency. Then press [MENU] and use
[Preset store]. Now Press [ or ] to view the stored stations, and then press [ENTER] to
- EN 14 -
or to select [Scan setting], then press
and to select