Running Diagtools From The Hp "Recovery" Cd-Rom; Running Diagtools From The Hp Diagtools Cd-Rom - HP Brio BA200 User Manual

Running DiagTools from the HP "Recovery" CD-ROM

To run DiagTools from the HP PC Image Engineer - Image Creation and
Recovery CD-ROM (for Vectra and Kayak), or Brio Assist CD-ROM (for
Brio) that came with your computer, follow this procedure:
1 Insert the HP CD-ROM in your CD-ROM drive. Shut down the
operating system and restart your computer.
2 Ensure that the option to start from the CD-ROM drive is enabled,
and that the CD-ROM is configured to be the first device to boot
from.
3 The main menu of the HP CD-ROM appears. Select the option to run
the hardware diagnostics.
DiagTools will start, displaying the Welcome screen (refer to page 6).

Running DiagTools from the HP DiagTools CD-ROM

To run DiagTools from the HP DiagTools CD-ROM, follow this
procedure:
1 Insert the HP DiagTools CD-ROM in your CD-ROM drive. Shut down
the operating system and restart your computer.
2 Ensure that the option to start from the CD-ROM drive is enabled
and that the CD-ROM is configured to be the first device to boot
from.
3 The programs on the CD-ROM will automatically determine the
appropriate version of DiagTools to run. DiagTools will start,
displaying the Welcome screen (refer to page 6).
1 Running DiagTools
Running DiagTools from the HP "Recovery" CD-ROM
English 5