HP Brio BA200 User Manual page 66

Appendix A The Error Codes
0500h – 05FFh: SCSI Error Codes
Code
050Ch Error in Partition Table.
050Dh Boot sector error.
050Eh Media error.
050Fh Inconsistent sector numbers.
0510h Cannot allocate memory.
0511h Positioning failed on tape drive.
0512h Tape read error.
0514h Tape write error.
0515h Tape Selftest error.
0516h Tape buffer error.
0520h No CD in drive.
54
Explanation
English
Details/Parts to Check
Read error in disk partition table area.
Boot partition is defined incorrectly. Run disk
utilities.
Media description of partition is incorrect. Partition
may not be useable.
Sector number information in Partition Table is
incorrect. Partition is useable, but error will occur
when data accessed exceeds the number of blocks
defined in table.
Diagnostic test error.
Remove any installed device drivers and restart the
PC or PC Workstation.
Re-run the diagnostic tests.
SCSI tape drive error.
Check the tape drive is connected and configured
correctly.
If error persists, install new SCSI tape drive.
SCSI tape drive error.
Install new SCSI tape drive.
SCSI tape drive error.
Install new SCSI tape drive.
SCSI tape drive error.
Install new SCSI tape drive.
Replace tape.
If error persists, install new tape drive.
SCSI CD-ROM error.
Insert a CD into the CD-ROM drive.