Limitations; Status Indication - HP ProCurve J8161A Installation And Getting Started Manual

External power supplies
Table of Contents

Advertisement

Installing and Connecting the HP 600/610 External Power Supplies
Recommended Connection Topologies
EPS cables

Limitations

EPS ports A1 and A2 share one common internal power supply; ports B1 and
B2 share a second common internal power supply. The maximum power that
can be supplied to each port pair is 408 W. In other words, if both ports in a
pair are connected to PoE switches, then the maximum power that each port
can provide is 204 W; but if only one port in a pair is connected to a PoE switch,
that port can provide up to 408 W.
In the illustration above, the four switches connected to the HP 610 EPS are
limited to 204 W of power on each EPS port. If a switch tries to draw more
than 204 W of power from the HP 610 EPS, an over-current condition occurs
and the EPS port shuts down. To supply more than 204 W on one EPS port,
the other port in the pair must first be disconnected. The maximum power
that can be provided when only one EPS port in a pair is connected to a switch
is 408 W.

Status Indication

The EPS Port Power Status LEDs on the HP 610 EPS indicate if an EPS port
is providing power to the connected device. For example, if four switches are
connected to the HP 610 EPS and the power to the switch on port A1 fails, the
Power Status LED for port A1 turns off, but for ports A2, B1, and B2 it remains
on.
2-20
RPS
12 V
7.5 A
50 V
16 A
RPS
12 V
7.5 A
50 V
16 A
RPS
12 V
7.5 A
50 V
16 A
RPS
12 V
7.5 A
50 V
16 A
HP ProCurve
610 EPS
J8169A
EPS Backup Power Ports Status
Power
Internal Power Status
Out Ready
In Ready
Fan/Temp Status
Fault
Fan/Temp Status flash = Temperature too high
Fan/Temp Status + Fault flash = Fan failure
HP ProCurve Switch 2650-PWR units
Line: 50/60 Hz.
100-240 V~ 7.5 A
Line: 50/60 Hz.
100-240 V~ 7.5 A
Line: 50/60 Hz.
100-240 V~ 7.5 A
Line: 50/60 Hz.
100-240 V~ 7.5 A
EPS Ports Pair A
(408 W total for PoE applications)
EPS Ports Pair B
(408 W total for PoE applications)
Device
A1
A2
B1
B2
Connected
EPS A1
EPS A2
EPS B1
EPS B2
Power
Status
EPS Ports: 50 V
8.3 A max per port pair.
Device
HP 610 EPS
Connected
Power
Status
AC power

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 600J8169aProcurve 610J8168a

Table of Contents