Advertisement
GENERAL INSTRUCTIONS FOR 230V MACHINES
The following will enable you to observe good working
practices, keep yourself and fellow workers safe and maintain
your tools and equipment in good working order.
WARNING!! KEEP TOOLS AND EQUIPMENT
OUT OF REACH OF YOUNG CHILDREN
KEEP WORK AREA AS UNCLUTTERED AS IS
PRACTICAL. UNDER NO CIRCUMSTANCES SHOULD
CHILDREN BE ALLOWED IN WORK AREAS.
Mains Powered Tools
• Tools are supplied with an attached 16 Amp plug.
• Inspect the cable and plug to ensure that neither are
damaged. Repair if necessary by a suitably qualified person.
• Do not use when or where it is liable to get wet.
Workplace
• Do not use 230V a.c. powered tools anywhere
within a site area that is flooded.
• Keep machine clean.
• Leave machine unplugged until work is about to commence.
• Always disconnect by pulling on the plug body
and not the cable.
SPECIFICATION
Code
Model
Rating
Power
Plug
Blade Speed
Blade Length
Max Width of Cut
Max Depth of Cut
Max Width of Cut with Fence
Airflow Required
Table Size
Table Tilt
Table Height
Wheel Diameter
Noise Level
Dust Extraction Outlet
Overall L x W x H
Weight
• Carry out a final check e.g. check the cutting tool
is securely tightened in the machine and the correct
speed and function set.
• Ensure you are comfortable before you start work,
balanced, not reaching etc.
• Wear appropriate safety clothing, goggles, gloves,
masks etc. Wear ear defenders at all times.
• If you have long hair wear a hair net or helmet to prevent it
being caught up in the rotating parts of the machine.
• Consideration should be given to the removal of rings and
wristwatches.
• Consideration should also be given to non-slip footwear etc.
• If another person is to use the machine, ensure they are
suitably qualified to use it.
• Do not use the machine if you are tired or distracted
• Do not use this machine within the designated safety areas
of flammable liquid stores or in areas where there may be
volatile gases.
• Check cutters are correct type and size, are undamaged
and are kept clean and sharp, this will maintain their
operating performance and lessen the loading on the
machine.
• OBSERVE.... make sure you know what is happening
around you and USE YOUR COMMON SENSE.
4
107644
AP3352B
Professional
2.2kW 230V 1ph
3 pin 16 Amp
950 m/min
3,352 mm (132")
360 mm
350 mm
315 mm
3
1,200 m
/hr
510 x 510 mm
+15˚ to -45˚
870 mm
380 mm
75dB (A)
2 x 100 mm
750 x 495 x 1,720 mm
202 kg
Advertisement
