Connecting The Projector; Connecting A Computer - Sony VPL-FHZ700 Operating Instructions Manual

B Preparation

Connecting the Projector

Notes
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.

Connecting a Computer

Connection with a computer is explained for each input signal.
INPUT A
For connection when there is a long distance between a computer and the projector.
Computer
INPUT B
For connecting a computer with an RGB output terminal.
Computer
Note
It is recommended that you set the resolution of your computer to 1920 × 1200 pixels for the external
monitor.
8
Connecting the Projector
RGB output
terminal
Mini D-sub 15-pin – BNC cable
(not supplied)
RGB output
terminal
Mini D-sub 15-pin
cable (not supplied)