Pioneer PDM-4001 Technical Manual page 130

Mounting standard metal fixtures
(Precautions for installing the optional speaker)
3 ) Wall-hanging metal fixture (PDK-4006)
When the wall hanging metal fixture is mounted to the plasma display with the optional speaker, use the monitor-
mounting bolt to tighten the speaker, as indicated in Fig.4. Next, as shown in Fig.5, follow the usual steps for mounting
the wall hanging metal fixture.
After the optional speaker is mounted, it will be difficult to see the monitor-mounting bolt attaching section on the wall
hanging metal fixture side and the angle setting screw section. Take appropriate precautions when mounting the
optional speaker.
Monitor mounting bolt
(supplied with the PDK-4006)
Monitor fixing bolt
(supplied with the PDK-4006)
Wall hanging metal fixture
130
Hole rivet
Monitor fixing bolt
(supplied with the PDK-4006)
Fig. 4
Fig. 5