Mounting The Pdp Bracket (Pdk-4005) With Pda-4002 Mounted - Pioneer PDM-4001 Technical Manual

Mounting standard metal fixtures (PDA-4001 • PDA-4002)

4.11.3 Mounting the PDP bracket (PDK-4005) with PDA-4002 mounted

To attach the PDP bracket (PDK-4005) with the PDA-4002 mounted, tighten along with the filter-supporting metal
fixture, as shown below.
Hexagonal socket head
button bolt (M8 x M18)
(supplied with the PDA-
4002)
In this case, use both the hexagonal socket-head button bolt (M8 x 18) and the washer supplied with the
PDA-4002. If the PDK-4005 is tightened using the hexagonal socket-head button bolt (M8 x 14) supplied
with the PDK-4005, the screw is too short to provide sufficient strength. To ensure safe operation, use the
Caution
M8 x 18 bolt.
Hexagonal socket head
button bolt (M8 x M18)
(supplied with the PDA-
4002)
M8 wave washers
(supplied with the
PDK-4005)
Hexagonal socket head
button bolt (M8 x M18)
(supplied with the PDA-
4002)
Hexagonal socket head
button bolt (M8 x M18)
(supplied with the PDA-
4002)
123