Other Programming; Registering A Unit - Panasonic KX-TGM450 Operating Instructions Manual

Programming
Important:
R Make sure the unit's date and time setting
is correct (page 21).
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1
For handset: MMENUN#238
For base unit (using a handset):
MMENUN#*238
2
MbN: Select the desired setting. a
MSAVEN
R If you select "Off", press MOFFN to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
*: Select "AM" or "PM". a MOKN
5
Enter the desired hour and minute you
wish to end this feature.
6
*: Select "AM" or "PM".
7
MSAVEN a MOFFN
Changing the start and end time
1
For handset: MMENUN#237
For base unit (using a handset):
MMENUN#*237
2
Continue from step 3, "Turning silent
mode on/off", page 50.
Selecting groups to bypass silent
mode
1
For handset: MMENUN#241
For base unit (using a handset):
MMENUN#*241
2
MbN: Select the desired groups. a
MSELECTN
R " " is displayed next to the selected
group numbers.
R To cancel the selected group:
MbN: Select the group. a Press
MSELECTN again. "
3
MSAVEN a MOFFN
For assistance, please visit http://shop.panasonic.com/support
50
TGM420_450(en)_0426_ver031.pdf

Other programming

Changing the handset
name
The default handset name is "Handset 1" to
"Handset 6". You can customize the name
of each handset ("Bob", "Kitchen", etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 50).
1
2
Displaying the handset
name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is "Off".
1
2

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R See page 5 for information on the available
model.
Registering a handset to
" disappears.
the base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
50
MMENUN#104
Enter the desired name (10 characters
max.). a MSAVEN a MOFFN
MMENUN#105
MbN: Select the desired setting. a
MSAVEN a MOFFN
2016/04/26 10:55:39