Before You Start; Installation And Maintenance; Electrical Safety - Rangemaster RMB6013BL/SS User Manual & Installation & Service Instructions

13 function single oven
Table of Contents

Advertisement

1.

Before You Start...

Thank you for buying a Rangemaster appliance.
It should give you many years trouble-free
cooking if installed and operated correctly. It is
important that you read this section before you
start.
CAUTION: This appliance is for cooking
n
purposes only. It must not be used
for other purposes, for example room
heating. Using it for any other purpose
could invalidate any warranty or liability
claim. Besides invalidating claims this
wastes fuel and may overheat the
control knobs.

Installation and Maintenance

The electrical installation should be in
accordance with BS 7671, or with the
relevant national and local regulations.
Have the installer show you the location of
the oven control switch and mark it for easy
reference.
It is recommended that this appliance is
serviced annually. Only a qualified service
engineer should service the oven, and only
approved spare parts should be used.
Make sure that the oven is wired in and
switched on.
Always allow the oven to cool and then switch
it off at the mains before cleaning or carrying
out any maintenance work, unless otherwise
specified in this guide.

Electrical Safety

The electrical installation must be installed in
accordance with all relevant British Standards/
Codes of Practice, BS 7671. Or with the relevant
national and local regulations and with the
local gas and electricity supply companies'
requirements.
Otherwise, all installations must be in
accordance with the relevant instructions in
this booklet.
Read the instructions before installing or using
this appliance.
The rating plate is located on the right side
of the door.
This appliance is heavy so take care when
moving it.
The appliance may be installed in a
kitchen/kitchen diner but NOT in a room
containing a bath or shower.
This appliance MUST be earthed.
The appliance MUST NOT be connected to
an ordinary domestic power point.
Set the clock to make sure that the
appliance is functional – see the relevant
section in this manual.
The appliance must be installed in
accordance with the regulations in force
and only in a well ventilated space.
Failure to install the appliance correctly
could invalidate any warranty or liability
claims and lead to prosecution.
DO NOT manouvre the appliance while it is
plugged into the electricity supply.
Before electrical reconnection, check that
the appliance is electrically safe.
The appliance should be powered down
n
before replacing the lamp to avoid the
possibility of electric shock. During oven
operation, the interior surfaces become
very hot.
1

Advertisement

Table of Contents
loading

Table of Contents