Table of Contents
Advertisement
ROTATING OPERATION
HCR-150 Hedge Clipper rear handle is adjustable for operator comfort
at all angles of operation.
WARNING
Stop engine before rotating rear handle, otherwise serious personal
injury may result.
Rotating Rear Handle
1. Move stop switch to STOP position.
NOTE
Throttle trigger must be at idle position in order to press the
rotation lock button.
2. Press lock button (A) to unlock rear handle rotation.
3. Rotate rear handle (B) right or left to the 45º or 90º detent setting. A
slight "CLICK" will be heard as the detent is engaged.
4. Grip the rear handle. Press the throttle lockout lever down with palm
of hand and squeeze throttle trigger (C) to engage rotation lock
button (A), and lock handle in position.
NOTE
If after rotating rear handle the throttle trigger does not operate,
move rear handle slightly left and right until detent engages and
throttle trigger operates normally.
DANGER
H
C
EDGE
O
'
M
PERATOR
S
A
45º left
90º left
A
C
LIPPER
13
ANUAL
B
45º
right
90º
right
Advertisement
Table of Contents
