Table of Contents
Advertisement
Quick Links
Hedge Clipper
Operator's Manual
MODEL
Read rules for safe operation and all instructions carefully. ECHO provides this
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation.
X7502291200
HCR-150
Serial Number 05001001 - 05999999
WARNING
DANGER
X750004630
12/02
Advertisement
Table of Contents
Related Manuals for Echo 05999999
Summary of Contents for Echo 05999999
- Page 1 MODEL HCR-150 Serial Number 05001001 - 05999999 WARNING DANGER Read rules for safe operation and all instructions carefully. ECHO provides this Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. X750004630 X7502291200...
-
Page 2: Table Of Contents
NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operations tips and SAFETY messages. -
Page 3: Manual Safety Symbols And Important Information
Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDER- ING instructions for specific information. -
Page 4: International Symbols
Proper clothing and safety gear must be worn when operating a hedge clipper. Hearing Protection Physical Condition Wear hearing protection. ECHO recommends wearing Your judgment and physical dexterity may not be good: hearing protection whenever unit is used. -
Page 5: Extended Operation/Extreme Conditions
Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combi- nation. ECHO, INC. will not be responsible for the failure of cutting devices, attachments, or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual. -
Page 6: Safe Operation
SAFE OPERATION WARNING DANGER Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Provide Safety And Operating Instructions To All Operators • Provide all users of this equipment with the Operator's Manual and Safety Manual for instructions on Safe Operation. -
Page 7: Description
The ECHO product you purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. - Page 8 19. SAFETY VIDEO - (Not included with unit) P/N 99922202800 English version and P/N 99922203513 Spanish version are available at a cost of $5.00 from ECHO, INC. or any authorized ECHO dealer. The video overviews safety precau- tions and proper operating techniques and is supplemental to the Safety Manual. Read and understand the Safety...
-
Page 9: Specifications
Spark Plug -------------------------------------------------- BPM-8Y (Gap 0.65 mm (0.026 in.) Fuel ---------------------------------------------------------- Mixed Fuel - gasoline and oil Fuel/Oil Ratio ----------------------------------------------- 50:1 Ratio using ECHO Hi-Performance, two-stroke air cooled engine oil Gasoline ----------------------------------------------------- 89 Octane Unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl alcohol or 15% MTBE. -
Page 10: Pre-Operation
After Refueling lubrication caused by failure to use an ISO-L-EGD and J.A.S.O. FC certified oil, such as Echo Premium 50:1 Two-stroke Oil, will void the • Wipe any spilled fuel from the unit. • Move at least 3 m (10 ft.) from refueling two-stroke engine warranty. -
Page 11: Operation
DANGER The blades should not move at idle. If blades move, readjust carburetor according to "Carburetor Adjustment" instructions in this manual or see your ECHO Dealer, otherwise serious personal injury may result. NOTE If engine does not start with choke in “Run” position after 5 pulls, repeat instructions. -
Page 12: Starting Cold Engine
DANGER The blades should not move at idle. If blades move, readjust carburetor according to "Carburetor Adjustment" instructions in this manual or see your ECHO Dealer, otherwise serious personal injury may result. 1. Stop Switch Move stop switch (A) away from the STOP position. -
Page 13: Rotating Operation
EDGE LIPPER PERATOR ANUAL ROTATING OPERATION HCR-150 Hedge Clipper rear handle is adjustable for operator comfort at all angles of operation. WARNING DANGER Stop engine before rotating rear handle, otherwise serious personal injury may result. Rotating Rear Handle 1. Move stop switch to STOP position. 45º... -
Page 14: Hedge Trimming
ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOUR- SELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed, see your ECHO Service Dealer for repairs. -
Page 15: Maintenance Intervals
EDGE LIPPER PERATOR ANUAL MAINTENANCE INTERVALS n i l t I - t l i t l i n i l l f f l i o s t l t n i o i t ® y l l i r u o i t n i f... -
Page 16: Air Filter
AIR FILTER Level 1. Tools required: 25 or 50 mm (1 or 2 in.) medium bristle paint brush Parts required: 90008 REPOWER Air & Fuel Filter Kit 1. Close choke (Cold Start Position). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumu- lated dirt from the air cleaner area. -
Page 17: Spark Plug
EDGE LIPPER PERATOR ANUAL SPARK PLUG Level 2. Tools required: T-wrench, Feeler gauge, Soft metal brush Parts required: REPOWER Tune-Up Kit P/N 90074 1. Remove spark plug and check for fouling, worn and rounded center electrode. 2. Clean the plug or replace with a new one. DO NOT sand blast to clean. -
Page 18: Exhaust System
The cylinder exhaust port must be inspected and cleaned of excess carbon every 3 months or 90 hours of operation in order to maintain this engine within the emissions durability period. ECHO strongly recommends that you return your unit to your ECHO dealer for this important maintenance service. EXHAUST SYSTEM Spark Arrestor Screen Level 2. -
Page 19: Carburetor Adjustment Emission
High Altitude Adjustment High altitude adjustment is not required for proper operation of this engine. Level 2. Tools required: Screwdriver, Tachometer (ECHO P/N 99051130017). Parts required: None. NOTE Every unit is run at the factory and the carburetor is set in compli- ance with emission regulations. -
Page 20: Lubrication
LUBRICATION Blades Level 1. Tools required: Clean rag, 25 or 50 mm (1 or 2 in.) medium bristle paint brush Parts Required: 20W Engine Oil (lubrication), 50-50 mixture of kerosene and 20W oil (cleaning). WARNING DANGER Hedge Clipper Blades are very sharp. Wear gloves to protect hands. -
Page 21: Blade Stiffener Remove/Install
LIPPER PERATOR ANUAL Gear Box Assembly Level 1. Tools required: Grease Gun, Clean rag Parts required: ECHO LUBE 14 oz. (P/N 91015) or ® Lithium Based Grease. 1. Clean dirt from the grease fitting (A). 2. Carefully pump grease in each fitting. DO NOT force grease. -
Page 22: Sharpening Blades
6. Loosen blade bolts 1/2 turn then install locknuts while holding blade bolts in place. 7. Lubricate blades. See "Blade Lubrication Instructions," on page 20. IMPORTANT Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer, otherwise premature wear or internal damage may occur. -
Page 23: Troubleshooting
EDGE LIPPER PERATOR ANUAL ROUBLESHOOTING r o t r o t i a r i l l r o t r e l i l y i l y r o t r e l f f u r e l h t i r u t r / n... -
Page 24: Storage
TORAGE WARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious personal injury may result. Long Term Storage (over 30 days) Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte- nance which includes the following: Store unit in a dry, dust free place, out of the reach of children. - Page 25 EDGE LIPPER PERATOR ANUAL NOTES...
- Page 26 NOTES...
- Page 27 EDGE LIPPER PERATOR ANUAL NOTES...
-
Page 28: Servicing Information
• Sending a check or money order for $2.00 per Parts Catalog or $1.50 per Operator's Manual made payable to ECHO, INCORPORATED. State on a sheet of paper the model number and serial number of the ECHO unit you have, part number of the manual (if known), your name and address and mail to address below.