Preparation; N St Allat I On; General Notes - Fagor 6FID-4GL X Instructions For Use And Maintanence

In case of a gas leakage:
immediately close the valve of the gas system or gas bottle
ventilate the room thoroughly
call gas service
During this time do not:
light matches or smoke
turn on or turn off electrical devices (radio, door bell, light) or mechanical devices that
spark.
If the gas coming out of a leaky valve of the gas bottle will ignite, put a wet blanket on the
bottle to cool it and then close the valve.
Never use the hob if its supply wire or plug is broken.
Wa rning !
Should you find a ny c ra c k on t he e le c t ric pla t e , im m e dia t e ly disc onne c t t he hob
from t he e le c t ric syst e m a nd c a ll a n a ut horise d se rvic e pe rsonne l.
1 .5 PREPARAT I ON
1. Remove all packaging items, including protective layers, from chromed elements and stainless steel
parts.
2. Wipe enamelled surfaces with a soft, damped cloth.
3. Make sure that all parts of burners are positioned correctly.
4. Before the first use, turn the electric plate ON for approx. 5 minutes by turning the knob to position
"6 ", exceptionally without any pot or pan. During this time the protective layer on the plate will burn
out. When the plate has cooled down, wipe the plate with a dry cloth.
2 I N ST ALLAT I ON
2 .1 GEN ERAL N OT ES
At t e nt ion !
1. T his hob m ust be inst a lle d a nd re pa ire d only by a n a ut horise d fit t e r a c c ording t o
t he m a nufa c t ure r's inst ruc t ions.
2. Be fore inst a lla t ion, disc onne c t t he hob from t he e le c t ric supply.
After unpacking, make sure that the hob has no visible damage and the power cord is in good
condition. If there is a damage, please contact our Customer Service.
This hob may be installed on a worktop that is at least 30mm thick (Fig. 5). The worktop must be
heat-resistant.
The wall next to the rear side of the hob should be made of incombustible material.
A minimum distance of 100mm must be maintained between the side edges of the hob and any
adjacent furniture.
To reduce negative impact of draught on burner operation, do not install this hob on the window-door
line.
There should be a free space left over the hob for discharging fumes. The best solution is to install a
cooker hood which will absorb and discharge these fumes. The minimum distance between the hob
and cooker hood is 650mm.
UK
INSTALLATION
DO N OT U SE A DAM AGED GAS BOT T LE!
5