DEVICE INFORMATION
Shows device status, and device-specific information.
Dante model
q
w
Screen after scrolling
downwards
e
q THERMAL
Shows the amplifier temperature in five stages. The limiter will be activated based on
the temperature detected.
w VERSION
• FIRMWARE: Shows the firmware version.
• Dante: Shows three Dante versions.
e SERIAL
Shows the serial number.
Standard model
q
w
INITIALIZE
Initializes the data of all settings.
WARNING
Disconnect all the cables except the power cord before this operation. A sudden
loud sound might occur when initializing is completed, if an audio signal is pres-
ent.
For initializing, when the screen shown below appears, press the main knob. When a con-
firmation screen appears, select YES to restart this product. If you cancel the initialization
procedure, press the [
] (Back) key when the screen shown below appears.
NOTICE
The HOME screen will appear after restarting, indicating that the initialization procedure is
complete. Turning the power switch off before the HOME screen appears could cause a mal-
function.
Screen Functions
26