D-Xsub Screen Subwoofer; Eq Screen; Delay Screen - Yamaha DZR315-D Reference Manual

D-XSUB Screen
Subwoofer
Switches a D-XSUB preset.
Set to the optimal frequency response characteristics according to the application and
genre of music.
• OFF (NORMAL): Turns D-XSUB off. This is a general-purpose frequency response
characteristic setting.
• BOOST: Boosts the frequency band accentuating a sense of punch in the audio.
• XTEND LF (extended LF): Extends playback frequencies to cover lower frequencies.

EQ Screen

Adjusts the frequency response characteristics for all speakers. Adjust the 6 Band EQ
parameters to your liking as well the intended application.
q
w
q ON/OFF
Turns the 6 Band EQ on/off. When off, only the outline of EQ characteristics will be
shown on the display.
w FLAT
Sets the amount of gain on all bands to 0 dB.
e Bands A – F
Select the desired band whose parameters you wish to check. Press the main knob on
the selected band to have the cursor move to the parameter display.
r Parameter Display
Shows the parameters of each band. Move the cursor to a parameter name and press
the main knob to start setting parameter values. Press the [
the cursor to the parameter name. Press the [
band selection screen.

DELAY Screen

Sets the delay time. This is used to compensate for the distance between speakers, etc.
Set this by time or distance.
q ON/OFF
Turns the delay on/off.
w TIME [ms]
Sets the delay time in milliseconds.
e
e DISTANCE [m, ft]
r
Sets the delay time by physical distance (in meters or in feet).
NOTE
The three delay time indications change in conjunction. The last edited unit will appear on the
HOME screen.
] (Back) key again to return to the
q
w
e
Screen Functions
] (Back) key to return
16