Heat & Glo SLF-550TR-IPI-E Owner's Manual page 59

FINISHING MATERIAL
4 IN. MAXIMUM
THICKNESS
(Includes 1/8 in. opening each side of door)
Finishing material between 1 and 4 inches thick.
Refer to Table 1 for X and Y dimensions.
Figure 13.20 Inside Fit Door (Chad)
FINISHING
MATERIAL
*IF FINISHING MATERIAL IS THICKER THAN
2 IN., DOORS WILL ONLY OPEN
AS FAR AS PICTURED
X
(Includes 1/8 in. opening each side of door)
Finishing material between 1 and 4 inches thick.
Refer to Table 1 for X and Y dimensions.
Figure 13.21 Operable Hinge Door (Halston)
FINISHING MATERIAL
4 IN. MAXIMUM
THICKNESS
DOOR
Y
X
FINISHING
MATERIAL
DOORS
Y
Heat & Glo • SLF-550TR-IPI-E • 2118-901 Rev. B • 7/12 59