Table of Contents
Advertisement
Web screen configurations
Multi screen setup screen [Multi-screen
setup]
The cameras whose images are to be displayed on the multi
screen are set here.
(continued)
IP address
Input here the IP address of the camera whose images
are to be displayed on the multi screen or the host name.
With one group consisting of 4 cameras, up to four groups
of cameras (a total of 16 cameras) can be registered.
Input as follows if the HTTP port number of the camera
whose images are to be displayed has been changed.
IPv4 address entry example http://192.168.0.10:8080
IPv6 address entry example http://[2001:db8:0:0:0:0:0:1]:8080
Enter the following when connecting via HTTPS.
Example of input
Maximum number of
characters
Factory settings:
Cam 1 to Cam 16: Not registered
Notes
● When connecting via HTTPS, install the security
certificate for the camera to be displayed.
(page 103)
● When configuring a host name, the DNS settings
of the personal computer that will display the multi
screen must be configured. For details on the
personal computer's DNS settings, consult your
network administrator.
Camera title
Input the camera title here. The camera title which has
been input is displayed on the multi screen.
● You can enter between 0 to 20 half-size characters.
● The following characters can be displayed.
Half-size numeric
characters
Half-size
alphabetical
characters
(upper and lower
cases)
Symbols
Factory settings:
Cam 1 to Cam 16: blank
Notes
● When a 16-screen multi screen is selected, camera
titles may be only partially displayed.
● Multi screen displays are displayed in 4:3 aspect
ratio.
https://192.168.0.10/
1 to 128 half-size characters
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
! #$%´()*+,-./:;=?@[]^_`{|}˜\
87
Advertisement
Table of Contents
