Table of Contents
Advertisement
Web camera functions
Audio input mixer [Audio Input Mixer
Properties]
Enable/Disable (Mute) [Enable]
The audio input signal from the device connected to the
audio input connector can be turned off or on in the same
way as "Audio" of the camera menus and Web settings.
Setting value: 0 (Off), 1 (On)
Volume
Set the microphone input, line input, and volume in the
same way as with "Input Volume" of camera menus and
Web settings.
Setting range: 0 to 1535
● The relationship to "Input Volume" of the camera menus
and Web settings is as follows.
1535 to 1280
Mic High
1279 to 1024
Mic Middle
1023 to 768
Mic Low
767 to 512
Line High
511 to 256
Line Middle
255 to 0
Line Low
Notes
● The volume may be adjusted automatically
depending on the communication software
used. Audio may not be stable depending on
the combination of the unit and communication
software.
● Video and audio may not be stable depending on
the performance of your personal computer or other
device. In this case, reduce the resolution and frame
rate of the video or input the audio not from the unit
but from the personal computer or other device.
116
(continued)
Notes
● In USB priority mode, H.264 image transmission
● When the device is connected by USB, the IP video
cannot be performed for IP video.
JPEG(1) setting is forcefully changed to 320
180/5fps.
×
Advertisement
Table of Contents
