Table of Contents
Advertisement
Web screen configurations
„ SD card tab [SD memory card]
„
Configure the format settings for the video to be recorded to
an SD card or initialize a card.
● The priority mode needs to be set to "SD card". For
details, refer to "Priority mode tab [Priority Mode]"
(page 65).
Recording format
Set the size, frame rate, and bit rate of the video to be
recorded to an SD card.
Setting value:
[When 59.94 Hz has been set as the unit's frequency]
1920x1080/59.94p 28Mbps
1920x1080/29.97p 15Mbps
1920x1080/29.97p 10Mbps
1920x1080/29.97p 6Mbps
1280x720/59.94p 15Mbps
1280x720/29.97p 8Mbps
1280x720/29.97p 4Mbps
1280x720/29.97p 2Mbps
1280x720/29.97p 1Mbps
[When 50 Hz has been set as the unit's frequency]
1920x1080/50p 28Mbps
1920x1080/25p 15Mbps
1920x1080/25p 10Mbps
1920x1080/25p 6Mbps
1280x720/50p 15Mbps
1280x720/25p 8Mbps
1280x720/25p 4Mbps
1280x720/25p 2Mbps
1280x720/25p 1Mbps
(continued)
Record tally
Turn the function for the tally lamp to light when recording
to an SD card on/off.
Factory settings: Off
Remaining capacity
(Remaining capacity/Original capacity)
Displays the remaining capacity and total capacity of the
SD card.
● Capacity is indicated in GB. If a card is not inserted or
recognized, "--- GB" is displayed.
● The correct capacity may not be displayed immediately
after an SD card is formatted (initialized) or if an SD
card is inserted after opening the SD card tab. If that
happens, click the [Reload] button.
Format
When you click the [Execute] button, a confirmation
message appears.
When you click the [OK] button, the SD card is formatted
(initialized).
Notes
● Recording to an SD card is not possible during
formatting.
● If you perform formatting, all of the data stored on
the SD card will be deleted.
● Do not turn off the power of the unit during
formatting.
67
Advertisement
Table of Contents
