Using The Timer - Panasonic NN-GD34HW Operating Instructions Manual

Using the Timer

Delay Start Cooking
By using the timer, you are able to program delay start cooking.
Example
Press
Set the delay time by
Timer/Clock
turning the dial
(up to 9 hours)�
Note
1� Three stage cooking can be programmed including delay start cooking�
Example
Delay start: 1 hour
2� If the programmed delay time exceeds one hour, the time will count down in units
of minutes� If less than one hour, the time will count down in units of seconds�
3� Delay start cannot be programmed before an auto program�
4� If the oven door is opened during the delay time, the time in the display window will
continue to count down�
Stand Time
By using the timer, you can program stand time after cooking is completed or use to program the
oven as a minute timer.
Example
Set the desired
cooking program
and cooking time.
Note
1� Three stage cooking can be programmed including stand time�
Example
1000 W Power: 4 min
Once
2� If the oven door is opened during the stand time or minute timer, the time in the
display window will continue to count down�
3� This feature may also be used as a minute timer� In this case press the timer,
set time and press Start�
4� Stand time cannot be programmed after an auto program�
5� If the programmed stand time exceeds one hour, the time will count down in units
of minutes� If less than one hour, the time will count down in units of seconds�
Set the desired
cooking program and
cooking time.
1000 W Power: 10 mins
Once
Press
Timer/Clock
Stand time: 5 min
300 W Power: 20 mins
5 times
Set desired amount of
time by turning the dial
(up to 9 hours)�
1000 W Power: 2 min
Once
Press
Start
Press
Start
23
EN