Cleaning The Adf - Plustek PSD300 User Manual

Cleaning the ADF

1. Open the ADF cover by pulling the lever.
Cover open lever
ADF cover
2. Gently wipe the following areas with the cloth dampened with the cleaner. Be
careful NOT to scratch their surfaces.
Clean Feed Roller:
Wipe the Feed Roller from side to side and then rotate it. Repeat this until its
entire surface is cleaned.
Clean Pad Module:
Wipe the Pad Module from top to bottom (in the direction of arrow shown in below
picture). Be careful not to damage the pick springs of the pad.
22