Plustek PSD300 User Manual page 14

b. Click on the Yes button if the User Account Control dialog pops up. Afterwards,
please skip to procedure 5.
4. For Windows 8 & Windows 10:
a. Insert the Setup/Application DVD-ROM, included with your scanner, into your
DVD-ROM drive. Click on the pop-up notification, then click Run install.exe in
the pop-up window. If you miss the pop-up notification, please eject and re-insert
the Setup/Application DVD-ROM.
b. Click on the Yes button if the User Account Control dialog pops up. Afterwards,
please skip to procedure 5.
5. Follow the on-screen instructions to install all software that your new scanner
requires. If the pop-up wizard window appears click Next, and click Install this driver
software anyway in the Windows Security window then click Finish in the wizard
window.
6. After the installation is complete, close all open applications and click the Finish
button to restart your computer.
Attention
 Save the Setup/Application DVD in case you
need to reinstall the driver and software in the
future.
 Save the Calibration Sheet in case you need
to calibrate the scanner in the future.
11