Table of Contents
Advertisement
Scan within your TWAIN compatible program:
1. Launch your TWAIN compatible program.
2. Open the TWAIN window within your TWAIN compatible program. Please refer
to your TWAIN compatible program manual for detailed information.
3. In the TWAIN window that opens, select ADF (Front Side) as the Scan Type if
you want to scan single-sided documents, or select ADF (Duplex) to scan
double-sided documents.
4. Adjust the scanning settings. For ADF (Duplex) scan, you can tailor settings
individually for front and rear sides of the documents. Click Front Side button to
adjust the scanning settings of document front side and then click Rear Side
button to adjust the scanning settings of document rear side.
You can enable the function of Merge Pages only when you select ADF (Duplex)
as Scan type and Automatic Size as Page Size to output the scan images of
both front and rear sides in one image. After the function of Merge Pages is
enabled, you can make the selection of Horizontally to generate both front and
rear image data horizontally in a joined image (the rear image will be placed at
the right side next to the front image), or make the selection of Vertically to
generate both front and rear image data vertically in a joined image (the rear
image will be placed below the front image).
5. Load one page of the document and click the Preview button. The scanned
image should appear in the Preview Window. To define the margins and crop out
sections of the image you don't want scanned, use the mouse to click and drag
the corners or sides of the scan area borders. Adjust the scan settings again if
the preview image doesn't satisfy your needs.
6. Load all pages of the document and click the Scan button.
14
Advertisement
Table of Contents
