Use And Operation - Scotsman C1848R Installation And User Manual

Remote condenser modular cuber
Hide thumbs Also See for C1848R:
Table of Contents

Advertisement

C1448, C1848, C2148 E Series
Remote Condenser Models - User Manual

Use and Operation

Once started, the ice machine will automatically make
ice until the bin or dispenser is full of ice.
When ice level drops, the ice machine will resume
making ice. There are four indicator lights at the
front of the machine that provide information on the
condition of the machine.
Caution: Do not place anything on top of the ice
machine, including the ice scoop. Debris and moisture
from objects on top of the machine can work their way
into the cabinet and cause serious damage. Damage
caused by foreign material is not covered by warranty.
Indicator Lights:
• Power
• Status
• Water
• Clean
Indicator Lights & Their Meanings
Power
Steady Green
Normal
Blinking Green
Self Test Failure
Blinking Red
-
Yellow
-
Blinking Yellow
-
Light off
No power
All Blinking
Unit remotely locked out – check with leasing company
If the Water light is on, the machine has sensed a
lack of water. Check the water supply to the machine.
The water may have been shut off or the water filter
cartridges need to be changed.
If the Clean light is on, the machine has determined
that it may need to be cleaned. Contact an authorized
Scotsman service agent and have the machine
cleaned, de-scaled and sanitized.
Note: A Component Indicator Light switches ON to
indicate that the component is operating.
Note: There are two Curtain Switch lights, SW1 and
SW2. A curtain switch light is ON when a curtain is
either open or not present.
Status
Normal – bin full or
making ice
Switching on or off
Diagnostic shutdown
or, if making ice,
temperature sensor
failure
-
-
Switched off
February 2016
Page 16
Water
De-Scale & Sanitize
-
-
-
-
Lack of water
-
-
Time to de-scale and
sanitize
-
In Cleaning mode
Normal
Normal

Advertisement

Table of Contents
loading

Table of Contents