Setup; Dispenser Unit/Ice Storage Bin And Icemaker Setup - Hoshizaki KMD-460MWJ Instruction Manual

Modular crescent cuber
Hide thumbs Also See for KMD-460MWJ:
Table of Contents

Advertisement

D. Setup

1. Dispenser Unit/Ice Storage Bin and Icemaker Setup

The installer must ensure the dispenser unit/ice storage bin is compatible with
the icemaker, and the dispenser unit/ice storage bin and icemaker are properly
attached and secured.
1) If mounting the icemaker on top of a dispenser unit, follow the dispenser unit's setup
procedure. If mounting the icemaker on top of an ice storage bin, unpack the ice storage
bin and attach the 4 adjustable legs provided (bin accessory) to the bottom of the ice
storage bin.
2) Position the dispenser unit/ice storage bin in its permanent location.
3) If required, install an adapter kit or top kit. Contact your local Hoshizaki distributor for
recommendations.
4) Level the dispenser unit/ice storage bin in both the left-to-right and front-to-rear
directions. If using an ice storage bin, adjust the ice storage bin legs to level.
5) Place the icemaker on top of the dispenser unit/ice storage bin. NOTICE! Do not use
the side frame to lift the icemaker. See Fig.1. Lift the icemaker from the base.
6a) Dispenser Unit: Follow the dispenser unit, adapter kit, or top kit instructions for
securing the icemaker. If no instructions are available, secure the icemaker using the
mounting brackets provided. Rotate the mounting brackets so that they fit flush to the
dispenser unit. See Fig. 2a. Secure the mounting brackets to the icemaker with the bolts
provided. Secure the mounting brackets to the dispenser unit with self-tapping screws
(not provided). NOTICE! Use care to avoid damage to dispenser unit components
when attaching the mounting brackets.
6b) Ice Storage Bin: Follow the ice storage bin, adapter kit, or top kit instructions for
securing the icemaker. If no instructions are available, secure the icemaker using the
2 mounting brackets and the bolts provided. See Fig. 2b.
Mounting
Brackets
Bolts
Fig. 2a
Self-Tapping
Screws
(Not Provided)
WARNING
Icemaker
Dispenser
Unit
13
Fig. 2b
Ice
Storage
Bin
Icemaker
Bolts
Mounting
Brackets

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kmd-460majKmd-530majKmd-530mwjKmd-530mrj

Table of Contents