Hoshizaki KMD-460MWJ Instruction Manual page 15

7b) Coca-Cola Freestyle
Remove the extension bracket and 2 thumbscrews from the accessory bag. Secure the
bin control to the extension bracket using the 2 thumbscrews. See Fig. 6. Secure the
extension bracket to the rear interior wall using the 2 thumbscrews on the rear interior
wall. Route the bin control cable vinyl hose through the grommet as illustrated. Do not
leave any slack in the ice drop zone.
for Coca-Cola Freestyle
Thumbscrews from
Rear Interior Wall
Extension Bracket
from Accessory Bag
Fig. 6
Thumbscrews from
Accessory Bag
Bin Control
8) Replace the water tank, cube guide, and pump motor and float switch assembly in their
correct positions.
9) Secure the pump motor and float switch assembly with the 2 thumbscrews.
10) Reconnect the hoses.
11) Reconnect the pump motor connector and the float switch connector.
12) Replace insulation panel (B) in its correct position and secure with the 2 thumbscrews.
13) Replace insulation panel (A), the top insulation, the control box cover, and the exterior
panels in their correct positions.
Dispenser or Dispenser Unit with Thick Adapter Application:
®
Optional Bin Control Mount Position
Dispenser or Dispenser Unit with Thick Adapter
®
15
Bin Control Cable
Rear Interior Wall
Application
Grommet
Vinyl Hose