Table of Contents
Advertisement
Table 7. Environmental parameters (continued)
Parameter
Storage humidity
Maximum thermal output
Maximum operational altitude
Maximum non-operational altitude
Shock
NOTE:
Redundant AC power requires high-line 200 VAC to 240 VAC. Using low-line 120 VAC does not provide redundancy
for the switch.
Table 8. AC power requirements
Parameter
Power supply
Maximum current draw per system
Maximum power consumption
Typical power consumption
● 48x5W SFP56-DD optics
● 4x20W QSFP56-DD optics
● 4x15W QSFP56-DD optics
Table 9. DC power requirements
Parameter
Minimum and maximum input voltage range for 240 VDC
Input current at full load with fan
Minimum and maximum output voltage range
Maximum output current range
IEEE standards
The S5448F-ON switch complies with the following Dell EMC SmartFabric OS10 IEEE standards:
● 802.1ab (LLDP)
● TIA-1057 (LLDP-MED)
● 802.3ad (Link Aggregation)
● 802.1D (Bridging, STP)
● 802.1p (L2 Prioritization)
● 802.1Q (VLAN Tagging)
● 802.1Qbb (PFC)
● 802.1Qaz (ETS)
● 802.1X (Network Access Control)
● 802.3ac (Frame Extensions for VLAN Tagging)
● 802.3x (Flow Control)
● 802.3by (Optical fiber, twinax and backplane 25 Gigabit Ethernet)
Specifications
5% to 90%, noncondensing
1090 W = 3719.2 BTU/Hr
3,048 meters (10,000 feet)
10,668 meters (35,000 feet)
Dell EMC Spec SV0115 (108000336_REV_25)
Specifications
● 90-140 VAC (110-127 VAC nominal)
● 180–264* VAC (200-240 VAC nominal)
● *115–127 VAC (1200 W) only for turn on.
10.9A/9.1A at 100/120V AC 5.45A/4.54A at 200/240V AC
● Low line VAC: 1100 W
● High line VAC: 1600 W
900 W
Specifications
180–300 VDC
-40 V/24.0 A, -60 V/16.2 A
11.40–12.60 VDC
● 133 A /1600 W at 230 VAC
● 91 A/1100 W at 100 VAC
Specifications
51
Advertisement
Table of Contents
