12. Actual remote control procedure
Remote Control for C4FM Digital
When controlling remotely with the C4FM Digital Mobile Transceiver
The C4FM digital transceivers that support the remote-control function are: FTM-400XD/D, FTM-300D,
FTM-100D, FTM-7250D, FTM-3207D and FTM-3200D. (As of Oct 2020)
1 Be sure to confirm that the transceiver DP-ID is registered on the DR-2X/DR-2XE repeater.
2 Tune the transmit frequency of the transceiver to the uplink frequency of the CH-B side of the DR-2X/DR-
2XE.
3 Press and hold the "" key on the microphone.
4 "REMOTE REC/PLAY" or "REC/PLY" (Depending on the transceiver model) is displayed on the transceiver
screen, the remote-control is available.
• To cancel the remote-control, press the "" key on the microphone.
5 Input the 4-digit remote command by using the numeric keys.
• Press the "" key on the microphone to cancel the input command at any point in the process.
6 Press the "#" key on the microphone to transmit the inputted command.
7 After transmitting the command, press the "" key on the microphone to return to normal operation.
z If the FTM-400D/XD, FTM-100D or FTM-3200D firmware is not compatible with the DP-ID function, update the
transceiver to the latest firmware to utilize the DP-ID functions.
z The latest firmware is available on the YAESU website.
When controlling remotely with the FT-991A
1 Please confirm that the FT-991A DP-ID is registered on the DR-2X/DR-2XE repeater.
2 Tune the transmit frequency of the FT-991A to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
3 Set the FT-991A to the digital mode.
4 Press the [F(M-LIST)] button, then touch and hold [AMS] on the LCD.
5 When "REMOTE" is displayed on the FT-991A screen, the remote-control is available.
• To cancel the remote-control, touch [BACK] on the LCD.
6 Input the 4-digit remote command by touching the keys on the LCD.
• Touch [BACK] on the LCD to cancel the input command at any point in the process.
7 Touch the "ENT" key on the LCD to transmit the inputted command.
8 After transmitting the command, touch [BACK] on the LCD to return to normal operation.
z If the FT-991A firmware is not compatible with the DP-ID function, update the transceiver to the latest firmware to utilize
the DP-ID function.
z The latest firmware is available on the YAESU website.
Remote Control for Analog FM
Transmit the 4-digit DTMF codes from the transceiver to perform remote control.
1 Tune the transmit frequency to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
2 Set the transceiver to the analog FM mode.
3 While transmitting, press the "" key on the microphone, and then use the numeric keys to input the preset
4-digit remote command.
DR-2X / DR-2XE Operating Manual
29