Yaesu DR2XLAN Operating Manual page 43

Change the repeater to the HRI mode
1.
Turn the DR-2X/DR-2XE power OFF.
2. While pressing and holding the [ SETUP ] button, press the [ POWER ] switch.
3. While the "YAESU" logo is being displayed, release the [ SETUP ] button.
"HRI+REPEATER MODE" will appear on the display.
4.
Touch [ OK? ].
HRI mode will activate.
Return to REPEATER mode from HRI mode
1.
Turn the DR-2X/DR-2XE power OFF.
2.
While pressing and holding the [ SETUP ] button, press the [ POWER ] switch.
3. While the "YAESU" logo is being displayed, release the [ SETUP ] button.
"REPEATER MODE" will appear on the display.
4.
Touch [ OK? ].
The operation mode screen will appear on the display.
DR-2X / DR-2XE Operating Manual
POWER SETUP
HRI+REPEATER MODE
O K ?
W 6 D
POWER SETUP
REPEATER MODE
O K ?
W 6 D
Cance
X C -   
Cance
X C -   
41